YG22C Tungsten Carbide Cold Heading E Shoa , Li-Pellets tsa Carbide tse entsoeng ka Samente Bakeng sa Sesebelisoa sa Fastener

Tlhaloso e Khutšoanyane:

Mofuta	OD	ID	H	Mamello
Mofuta	OD	ID	H	OD	Id	H
D10~14×φd	10-14	1.0–5.0	15-40	D×+3%	d×-3%	H×+3%
D15~24×φd	15-24	1.5–8.0	20-60
D25~40×φd	25-40	1.5 ho isa ho 25	30-60
D42~95×φd	42-95	2.0–50	20-95

Bakeng sa boholo bo bong re khona ho iketsetsa ho latela litlhoko tsa bareki kapa litšoantšo

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Ke Hobane'ng ha U Re Khetha

Joalo ka moetsi le morekisi ea ruileng, RenQiu HengRui Cemented Carbide Co., Ltd ka ho fana ka mefuta e mengata e pharalletseng ea lisebelisoa tse batang bakeng sa Fastener Industries.Li-pellets tsa rona tse fanoang li etsoa ka thepa e tala ea boleng bo holimo ho latela maemo a machaba.Li-pellets tse fanoeng li fumaneha ka litlhaloso tse fapaneng 'me li ka boela tsa etsoa ho latela tlhoko ea bareki.Ha nako e ntse e ea, li-dies tsena li hlahlojoa ka nepo ho li-parameter tse 'maloa tsa boleng.

lihlahisoa tlhaloso

Ts'ebetso ea Kereiti

Tungsten Carbide Cold Forging/heading E shoa
Mephato	Botenya	TRS	Ho thatafala	Ts'ebetso le ts'ebeliso lia khothaletsoa
Mephato	g/cm³	MPa	HRA	Ts'ebetso le ts'ebeliso lia khothaletsoa
YG11	14.4	≥3000	88.5	Ho etsa kapa ho hatakela ho shoa bakeng sa phofo ea tšepe le phofo e seng tšepe.
YG15	14	≥3400	87.5	Bakeng sa ho etsa setšoantšo ho shoa ka li-tubes tsa tšepe le melamu tlas'a karo-karolelano e phahameng ea compressibility;ho otla ka litebele, ho hatakela, ho etsa lisebelisoa tlas'a khatello e kholo.
YG20	13.5	≥3800	85.5	Bakeng sa ho etsa litempe bakeng sa likarolo tsa oache, li-spring plate tsa liletsa tsa 'mino, linkho tsa libeteri, libolo tse nyane tsa tšepe, li-screw, li-screw caps.
YG15C	14	≥4000	86.5	Bakeng sa likotoana tsa ho cheka li-cone tsa oli, khaola majoe a mahareng a bonolo le a thata; ho phunya le ho rema lehong le leqhoa, lehong le bonolo le lehong la mantlha.
YG16C	13.9	≥3500	85.5	Tšusumetso ea ho hanyetsa e shoa.
YG18C	13.7	≥3600	84.5	Phetoho ea ho hanyetsa hoa shoa, mochini oa khatiso o chesang oa shoa le lirolara.
YG20C	13.5	≥3800	83.5	E shoa bakeng sa ts'ebeliso e sa sebetseng kapa e hananang le tšusumetso.
YG22C	13.3	≥4000	83	Ho etsa linate hoa shoa 'me khanyetso e matla ea ho hanyetsa ea shoa.
GT55	13.1	≥4250	82.5	Stainless bolt header ea shoa le lirolara.

Likaroloana

• Carbide e ka tšeptjoang e entsoeng ka samente e nang le bothata ba ho robeha ha hlooho le ho etsa linate

• Ho apara ka nako e telele limaraka tsa carbide tse nang le samente tse finyellang litlhoko tsa indasteri bakeng sa lisebelisoa tsa extrusion

• Lihlahisoa tse phahameng tse hlahisoang ke Hyperion's quality cemented carbides

• Sehlahisoa se phahameng se nang le likhetho tse entsoeng ka mamello.

Mokhoa oa Tlhahiso

Ho bapisa lintho tse bonahalang→ Ho Beha Libolo → Motsoako oa WC le Matla a Cobalt → Ho Tobetsa→ Libōpi tsa HIP Sintering → Ho lemoha QC → Ho paka

Netefaletso ea boleng

Pele ho tlhahiso ea bongata, re hloka ho etsa teko ea ho hatella le ho sintering, 'me re hlahloba ponahalo le boholo, letsoalo le boima ba lisampole tse nang le micrometer, microscope ea Metallurgical, densitometer joalo-joalo ho netefatsa hore litlhoko tsa litšoantšo li ka finyelloa pele ho sehlopha. tlhahiso;Lihlahisoa tsohle li tlameha ho hlahlojoa ka thata ke QC ea rona.

Tšebeletso ea Rōna

1. Re tla leka ka hohle ho araba kopo ea bareki ba rona nakong ea lihora tse 24.
2. Re tla boloka puisano e sebetsang le e sebetsang hantle le bareki ba rona.
3. Re fana ka taolo ea boleng ba boemo ba pele le lits'ebeletso tsa kamora thekiso.

Nako ea rona ea ho fana

Re tla fana ka thepa e ngata e hlahisoang nakong ea matsatsi a 30 ka mor'a tefo e tlase, ha re ntse re, haeba ho na le likopo tsa soecific ka nako ea ho fana.Re ka etsa phetoho ho latela kopo ea bareki, kahoo nako e khuts'oane ea ho fana e fumaneha ka botlalo.

Nako ea rona ea tefo

Hangata 30% T / T esale pele, leka-lekanya 70% khahlanong le kopi ea B / L.Hape e ka fetoha ho latela kopo ea bareki.
Re etsa likarolo ka libopeho le boholo bo fapaneng ho lumellana hantle le litlhoko tsa bareki ba rona, hore na ba hloka li-blocks kapa maqephe, li-cylinders, li-bearings, malebela kapa meno.

E fetileng: Cemented Tungsten Carbide Cold Heading Pellets For Cooling Heading Dies

E 'ngoe: YG25C Ho Hlōla Tungsten Carbide Tube E Nang le Tšusumetso e Ntle le Bophelo bo Bolelele